2019 High quality Industrial Liquid Storage Tank - Double Membrane gas storage holder – Boselan
2019 High quality Industrial Liquid Storage Tank - Double Membrane gas storage holder – Boselan Detail:
About It
The double methane tank is a 3/4 sphere in shape and is fixed on the cement base or the top of the anaerobic tank by steel rails.The main body is made of special processed polyester material. The ball is composed of outer membrane, inner membrane, bottom membrane (upper cabinet) and auxiliary equipment. It has the ability to resist ultraviolet rays and various microorganisms, and is highly fireproof and meets the standard.
An air tight space with variable capacity is formed between the inner membrane and the bottom membrane (above the ground) to store methane. The outer membrane forms the spherical shape of the storage tank.Use the outer membrane intake blower constant pressure, when the amount of inner membrane methane decreased, the outer membrane through the blower intake, to maintain the design pressure of inner membrane methane, when the amount of methane increased, the inner membrane normal expansion, through the safety valve will be the outer membrane excess air out, so that the methane pressure is always constant at a required design pressure.
The heat preservation principle of adjustable membrane methane gas storage tank: it can effectively prevent the cold air from entering by filling the air between the inner and outer membranes.
Introduction: Membrane gas holder
1.Raw material from the international standard verified factories.
2.We have experienced workers and whole membrane machining lines and strict product quality control process
3.Single holder Size can be customized from 2m³to 10000m³
4.Type can be semi-ball or cubic
5.We provide whole accessories from flange, gas pressure controller system, bolt, anchor plate, etc.
Membrane Details:
| Base Fabric | High strength low polyester filament yarn |
| Weight of base fabric(g/m³) | 265g/ m³ |
| Thickness | 0.85mm |
| Tensile Strength | 4000-4500N/5cm |
| Tear Strength | 550/550N |
| Threshold Temperature | -40℃-70℃ |
| Methane permeability | <280 CM3/M2/d/bar |
| Delivery Time: | 10-15 days after deposit received |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 100 sets per month |
Advantages of double membrane gas holder
1. High safety factor: The double-film gas storage holder is very safe and reliable, and has been used for more than 5 years.The system is equipped with overpressure safety valve, which will not cause roof collapse and collapse due to negative pressure, and can be operated unaccompanied completely.It will not produce waste water containing phenol like floating gas storage tank, causing secondary pollution.
2. Long service life: the service life of inner and outer membrane can reach more than 10 years.
3. Easy and fast installation: only the basic cement base is needed, and the installation can be completed in a few days, saving installation cost and time. It can be put into use immediately after the installation is completed.
4. Cost saving: The capacity in the cabinet can be fully utilized, which can simplify and save the civil construction cost of the base.It is cheaper than conventional dry or wet gas tanks.
Case Show
Product detail pictures:
Related Product Guide:
Our target is always to satisfy our customers by offering golden support, superior value and high quality for 2019 High quality Industrial Liquid Storage Tank - Double Membrane gas storage holder – Boselan, The product will supply to all over the world, such as: Czech Republic, Ghana, Jersey, Now, we professionally supplies customers with our main products And our business is not only the "buy" and "sell", but also focus on more. We target to be your loyal supplier and long-term cooperator in China. Now, We hope to be the friends with you.
By Ella from Panama - 2018.09.29 13:24
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Claire from Bulgaria - 2018.04.25 16:46
